---
title: Inicjalizacja switcha FC – Brocade (Dell)
description: "Procedura jest podobna w przypadku innych switchy FC SAN Brocade The Ready Stack uses Dell EMC Connectrix switches for FC storage traffic. Two Connectrix DS-6505B or DS-6510B series switches make up the FC fabrics. For FC guidelines for storage array and hosts, consult your Dell EMC…"
url: "https://rioco.pl/docs/inicjalizacja-sw-fc-connetrix-ds-6xxxx/"
updated: "2025-10-12"
category: FC Switch
---

# Inicjalizacja switcha FC – Brocade (Dell)

Procedura jest podobna w przypadku innych switchy FC SAN Brocade

The Ready Stack uses Dell EMC Connectrix switches for FC storage traffic. Two Connectrix DS-6505B or DS-6510B series switches make up the FC fabrics. For FC guidelines for storage array and hosts, consult your Dell EMC Sales representative.

- Connect all power cords and management cables.

- - Connect your setup computer COM port to the serial port on the switch using the serial cable that shipped with the switch.

The serial connection settings are as follows:

- 9600 bits per second
  - No parity/no flow control

  - 8 data bits/1 stop bit

  - Open a terminal emulator program such as PuTTY.

  - Power on the switch.

  - Verify that the switch has completed the boot process and that the operating system image is available.

  - From the terminal emulator program, log in to the switch console using the default credentials:

  - **Username**: admin

  - **Password**: password

  - When prompted, change the password.

  - Type ipAddrSet and press Enter to start the IP configuration dialog, and then configure the following settings:

  - **DHCP**—Select On or Off (the default is Off).

  - **Ethernet IP Address**—Set the IP address for the switch.

  - **Ethernet Subnet mask**—Set the subnet mask for the switch.

  - **Gateway IP Address**—Set the default gateway for the switch.

  - Close the terminal emulator program and disconnect the serial cable from the switch.

  - Repeat the process on the bottom switch if necessary.

  - Verify that the FC switches are visible on the network.